| Application: | Fiber Optic Cable, Overhead |
|---|---|
| Type: | Multi-mode Fiber |
| Connection Structure: | FC-MTRJ |
| Material Shape: | Round Wire |
| Allowed Lateral Pressure: | >1000(N/100mm) |
| Allowed Tensile Strength: | >10000N |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier The fibers,either of single-mode or multimode type, are placed in a loose tube made of high modulus plastic. The tubes are filled with a water
resistant filling compound. A FRP locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. After water blocking tape is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene (PE) sheath to be figure 8 structure. This kind of cable is specifically applied for self-supporting aerial installation.
Description
Ø low dispersion and attenuation.
Ø Proper design, precise cotrol for fiber excess length and distinct stranding process render the cable excellent mechanincal and environmental characteristics.
Ø Anti-electromagnetism ability.
Ø Samall cable diameter, light cable weight, self-supporting, easily to install.
Technical characterision
Very strict material and manufacturing control guarantees the cable can work stably for more than 30 years.
Total cross-section water-resistant structure makes cable have excellent properties of moisture resistance
Special jelly filled in the loose tube provides the fibers with critical protection
Figure-8 self-supporting structure, high tension strength, facilitate in aerial, low installation costs
copper wires in the cable for electric communication.
1. Cable Construction
1.1 Cross Sectional Diagram
| Fiber Counts | 48F | 96F |
| OD of Loose Tube | 1.9 ± 0.1 mm | |
| Max Fiber Counts/tube | 12 | |
| CSM FRP Diameter | 3.2 ± 0.1 mm | |
| Outer Sheath Material | Black PE | |
| Outer Sheath Thickness | 1.0 ± 0.2 mm | |
| Water block | Water Blocking Tape and Yarn | |
| OD of Cable | 9.3 ± 0.5 mm | |
| Net weight ( kg/km) | 88±5% | 88±5% |
| Operating temperature | - 10ºC~+60ºC | - 10ºC~+60ºC |
| Store/Transport temperature | - 10ºC~+60ºC | - 10ºC~+60ºC |
| Installation temperature | - 10ºC~+60ºC | - 10ºC~+60ºC |
| NO. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| Tube Color | Blue | Orange | Green | Brown | Grey | White | Red | Black | Yellow | Violet | Pink | Aqua |
| NO. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| Fiber Color | Blue | Orange | Green | Brown | Grey | natural | Red | Black | Yellow | Violet | Pink | Aqua |
| Items | Units | Specification |
| Fiber Type | - | G652D |
| Attenuation | dB/km | 1310 nm≤ 0.36 1550 nm≤ 0.22 |
| Chromatic Dispersion | ps/nm.km | 1310 nm≤ 3.5 1550 nm≤ 18 1625 nm≤ 22 |
| Zero Dispersion Slope | ps/nm2.km | 0.092 |
| Zero Dispersion Wavelength | nm | 1300 ~ 1324 |
| PMD (M=20, Q=0.01%) | ps/√km | ≤ 0.1 |
| Cut-off Wavelength (lcc) | nm | ≤ 1260 |
| Attenuation vs. Bending (60mm x100turns) |
dB | ≤ 0.1 at 1625 nm |
| Mode Field Diameter | mm | 9.2 ± 0.4 @1310nm |
| Core-Clad Concentricity | mm | ≤ 0.5 |
| Cladding Diameter | mm | 125±1 |
| Cladding Non-circularity | % | ≤ 0.8 |
| Coating Diameter | mm | 245±5 |
| Proof Test | Gpa | ≥ 0.69 |
| NO. | ITEMS | TEST METHOD | ACCEPTANCE CRITERIA |
| 1 | Tensile Loading Test |
#Test method: IEC 60794-1-E1 -. 1200N -. Cable length: ≥ 50 m |
-. Attenuation increment@1550 nm: ≤ 0.1 dB -. No jacket cracking and fiber breakage |
| 2 | Crush Resistance Test | #Test method: IEC 60794-1-E3 -.Long load: 1000 N/100mm -.Short load: 2000 N/100mm Load time:1 min of short term load, followed by 10 min of long term load |
-. Attenuation increment@1550 nm: ≤ 0.1 dB -. No jacket cracking and fiber breakage |
| 3 | Impact Resistance Test | #Test method: IEC 60794-1-E4 -.Impact height: 1 m -.Impact energy: 10 J with striking surface radius of 300 mm -.Impact point: ≥ 5 -.Impact frequency: ≥ 3/point |
-. Attenuation increment@1550 nm: ≤ 0.1 dB -. No jacket cracking and fiber breakage |
| 4 | Repeated Bending | #Test method: IEC 60794-1-E6 -.Mandrel diameter: 20 D (D = cable diameter) -.Bent backwards and forwards through angles: 180° -.Bending frequency: 25 times -.Bending speed: 2s/time |
-. Attenuation increment@1550 nm:≤ 0.1 dB -. No jacket cracking and fiber breakage |
| 5 | Torsion Test | #Test method: IEC 60794-1-E7 -.Length: 2 m -.Tension : 50 N -.Angle: ±180 degree -.Frequency: ≥ 10/point |
-. Attenuation increment@1550 nm: ≤ 0.1 dB -. No jacket cracking and fiber breakage |
| 6 | Water Penetration Test | #Test method: IEC 60794-1-F5B -.Height of pressure head: 1 m -.Length of specimen: 3 m -.Test time: 24 hours |
-. No leakage through the open cable end |
| 7 | Temperature Cycling Test | #Test method: IEC 60794-1-F1 -.Temperature steps: + 20ºC,- 40ºC,+ 70ºC,+ 20ºC -.Testing Time: 24 hours/step -.Cycle index: 2 |
-. Attenuation increment@1550 nm: ≤ 0.1 dB -. No jacket cracking and fiber breakage |
| 8 | Drop Performance |
#Test method:IEC 60794-1-E14 -.Testing length: 30 cm -.Temperature range: 70 ±2ºC -.Testing Time: 24 hours |
-. No filling compound drop out |
5.2 Fiber Optical Cable bending radius
Static bending: ≥ 12.5 times than cable out diameter
Dynamic bending: ≥ 25 times than cable out diameter.
6. Reference Standard
ITU-T G.652 : Characteristics of a single-mode optical fibre and cable
IEC 60794-4-2018--Optical fibre cables. Sectional specification. Aerial op.
7. Package and Mark
7.1 Package
Not allowed two length units of cable in one drum, two ends should be sealed, Two ends should be packed inside drum, reserve length of cable not less than 3 meters.
4km/roll Wooden Drum
7.2 Mark
According to customer requirements
About us
1.Are you the real manufacturer?
We are the real manufacturer with 15 year's history.
2.What's the MOQ?
The MOQ of Fiber Optic cable is 1km.
3.What's delivery time?
The general delivery time is 5-7 days after order confirmed. It depends on the order quantity.
4.How to Store the Optical Fiber Cable Properly?
Store the drum indoor before using, the drum should place sideways not on the end.
5. Can you supply customized products and logo?
We supply OEM service. You can send us your drawing.
6.What's your payment terms?
T/T, L/C,it can be negotiated.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}